Mazda CX-30 2020 Owner's Manual page 543

13.Install the compressor hose to the
tyre valve.
1. Valve
2. Compressor hose
14.Insert the compressor plug into the
interior accessory socket and switch
the ignition to ACC (page 5-35).
1. Compressor
2. Compressor plug
CAUTION
Before pulling out the compressor
plug from the electrical socket,
make sure the compressor power
switch is off.
The compressor turns on and off
with the push-button switch.
15.Turn the compressor switch on and
inflate the tyre carefully to the
correct inflation pressure.
WARNING
Never operate the compressor
above 300 kPa (3.1 kgf/cm
bar, 43.5 psi):
Operating the compressor above
300 kPa (3.1 kgf/cm
psi) is dangerous. When the
inflation pressure rises above 300
kPa (3.1 kgf/cm
heated air will be exhausted from
the back of the compressor and you
could be burned.
NOTE
Check the tyre inflation pressure

label (driver's door frame) for the
correct tyre inflation pressure.
Do not use the compressor for

longer than 10 minutes because
using the compressor for long
periods could damage it.
If Trouble Arises
Flat Tyre
2
, 3
2
, 3 bar, 43.5
2
, 3 bar, 43.5 psi),
7-31