Mazda CX-30 2020 Owner's Manual page 131

Refer to Transmitter on page 3-5.
The system will disarm if one of

the following operations takes
place within 20 seconds after
pressing the lock button:
Unlocking any door.

Opening any door.

Opening the bonnet.

Switching the ignition ON.

To rearm the system, do the
arming procedure again.
When the doors are locked by

pressing the lock button on the
transmitter while the
theft-deterrent system is armed,
the hazard warning lights will
flash once to indicate that the
system is armed.
▼ Cancelling the Intrusion Sensor
(With the Intrusion Sensor)
If the theft deterrent system has been
armed while any of the following
conditions are present, cancel the
intrusion sensor to prevent the alarm
from triggering unnecessarily.
Leaving the vehicle with a movable

object, passengers or pets remaining
inside.
Leaving an object inside the vehicle

that can roll around, such as when
the vehicle is placed on a tilting,
unstable surface when being
shipped.
Hanging small objects/accessories in

the vehicle, hanging clothing on a
coat hook, or placing other items
which can move easily inside the
vehicle.
Parking in an area where there is

strong vibration or loud noise.
When using a high pressure or

automatic car wash.
Continuous shock and vibration from

hail or thunder and lightning is
transmitted to the vehicle.
Doors are locked with a window or

*
the sunroof left open.
An accessory heater or device that

produces moving air and vibration
operates while the theft deterrent
system is armed.
NOTE
If any door or the liftgate remains
closed for 30 seconds, all the doors
and the liftgate automatically re-lock
and the theft deterrent system arms
even if a window and the sunroof
left open.
To cancel the intrusion sensor, press
the intrusion sensor cancel button on
the transmitter within 20 seconds after
pressing the lock button.
The hazard warning lights will flash 3
times.
NOTE
To reactivate the intrusion sensor,

turn off the armed theft-deterrent
system and then rearm it.
The intrusion sensor is operational

when the theft-deterrent system is
armed. To cancel the intrusion
sensor, press the intrusion sensor
cancel button each time the
theft-deterrent system is armed.
▼ To Turn Off an Armed System
An armed system can be turned off
using any one of the following
methods:
Pressing the unlock button on the

transmitter.
Starting the engine with the push

button start.
Before Driving
Security System
*
3-51
*Some models.
is