Mazda CX-30 2020 Owner's Manual page 253

The steering wheel is operated.

The brake pedal is operated.

The function is temporarily stopped.
The LDWS stops functioning in the
following cases:
The temperature in the forward

sensing camera (FSC) is too high or
too low.
The windscreen around the forward

sensing camera (FSC) is foggy.
The windscreen around the forward

sensing camera (FSC) is blocked by
an obstruction, causing poor forward
visibility.
Strong light (such as sunlight, or

headlights (high-beam) of
on-coming vehicles) is directed at
the forward sensing camera (FSC).
System malfunction
If there is a problem with the system,
the i-ACTIVSENSE status symbol
(warning/risk avoidance support
system) (white) and the i-ACTIVSENSE
warning indication/warning light on
the multi-information display turns on
and a message is indicated.
Refer to i-ACTIVSENSE Status Symbol
(Warning/Risk Avoidance Support
System) on page 4-96.
▼ Lane Departure Warning
If the system determines that the
vehicle may deviate from its lane, a
warning (beep sound, steering wheel
vibration) is activated and the direction
in which the system determines that
the vehicle may deviate is indicated on
the multi-information display and the
active driving display.
Multi-information display
Active driving display
NOTE
The LDWS settings can be changed.

Refer to the Settings section in the
Mazda Connect Owner's Manual.
You may not be able to hear the

LDWS warning sound depending on
the surrounding conditions such as
outside noise.
If you set the LDWS to vibrate the

steering wheel, you may not feel the
vibrations depending on the road
surface conditions.
▼ Cancelling the System
The LDWS can be set to inoperable.
(If only the LDWS is turned off)

Refer to the Settings section in the
Mazda Connect Owner's Manual.
(If the LDWS is turned off by

operating the i-ACTIVSENSE switch)
Refer to i-ACTIVSENSE Switch on
page 4-97.
When Driving
i-ACTIVSENSE
4-105