Mazda CX-30 2020 Owner's Manual page 178

When Driving
Instrument Cluster and Display
▼ Deceleration Regeneration Charge
Display (M Hybrid)
This displays the status of the charging
produced by deceleration
regeneration.
Refer to M Hybrid on page 4-86.
▼ Vehicle Speed Alarm
In this mode, the current setting for the
vehicle speed alarm is displayed. You
can change the vehicle speed setting at
which the warning is triggered.
NOTE
The vehicle speed alarm display is
activated at the same time the beep
sound is heard.
1. "Speed Alert" message is displayed
The vehicle speed alarm can be set
using the centre display.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
4-30
*Some models.
*
NOTE
Always set the vehicle speed according
to the laws and regulations of the
country/city in which the vehicle is
driven. In addition, always verify the
speed of the vehicle using the
speedometer.
▼ i-ACTIVSENSE Display
Displays the system status.
Refer to Lane Departure Warning

System (LDWS) on page 4-105.
Refer to Blind Spot Monitoring

(BSM) on page 4-109.
Refer to Traffic Sign Recognition

System (TSR) on page 4-113.
Refer to Distance & Speed Alert

(DSA) on page 4-119.
Refer to Driver Attention Alert (DAA)

on page 4-120.
Refer to Driver Monitoring (DM) on

page 4-122.
Refer to Front Cross Traffic Alert

(FCTA) on page 4-123.
Refer to Mazda Radar Cruise Control

(MRCC) on page 4-131.
Refer to Mazda Radar Cruise Control

with Stop & Go function (MRCC
with Stop & Go function) on page
4-140.
Refer to Cruising & Traffic Support

(CTS) on page 4-151.
Refer to Lane-keep Assist System

(LAS) on page 4-164.
Refer to Adjustable Speed Limiter

(ASL) on page 4-165.