Mazda CX-30 2020 Owner's Manual page 541

CAUTION
If the bottle is shaken after the
injection hose is screwed on, tyre
sealant could spray out from the
injection hose. Tyre sealant
contacting clothing or other objects
may be impossible to remove.
Shake the bottle before screwing on
the injection hose.
NOTE
The tyre sealant can be used at
outside temperatures down to －
30°C (－22°F).
In extremely cold temperatures
(0°C (32°F) or below), the tyre
sealant hardens easily and injection
of the sealant will be difficult.
Warm the sealant inside the vehicle
before doing the injection work.
6. Remove the cap from the bottle.
Screw on the injection hose with
the bottle's inner cap left on to
break the inner cap.
1. Injection hose
2. Bottle
7. Remove the valve cap from the flat
tyre. Press the back of a valve core
tool to the core of the tyre valve
and bleed all the remaining air.
1. Valve
2. Valve cap
3. Valve core tool
CAUTION
If there is air remaining in the tyre
when the valve core is removed, the
valve core could fly out. Remove
the valve core carefully.
8. Turn the valve core anticlockwise
with the valve core tool and remove
the valve core.
1. Valve
2. Valve core
NOTE
Store the valve core in a place
where it will not get dirty.
If Trouble Arises
Flat Tyre
7-29