Mazda CX-30 2020 Owner's Manual page 320

When Driving
i-ACTIVSENSE
WARNING
Always verify the safety of the
surrounding area when setting the
ISA:
If the speed is set lower than the
current vehicle speed, the vehicle
speed is decreased to the set speed.
Verify the safety of the surrounding
area and keep a safer distance
between vehicles ahead and behind
you.
NOTE
The system is temporarily cancelled

when the vehicle is accelerated by
depressing the accelerator pedal
strongly, however, it resumes when
the vehicle speed decreases to the
set speed or less.
The vehicle speed may exceed the

set speed on a down slope.
In the following cases, the system

cannot be set.
Any door is open.

The driver's seat belt is unfastened.

The ISA setting can be changed to

MANUAL, or OFF
Refer to the Settings section in the
Mazda Connect Owner's Manual.
*
1 When OFF is selected, the
Adjustable Speed Limiter (ASL) is
set.
Refer to Adjustable Speed Limiter
(ASL) on page 4-165.
How to set the speed limit using the
RES switch
1. Press the LIM switch to turn the
system on.
2. Press the RES switch up (SET+) or
down (SET-) to set the speed.
When the current vehicle speed is
30 km/h (19 mph) or more, the
4-172
*1
.
speed is set to the current vehicle
speed. When the current vehicle
speed is less than 30 km/h (19
mph), the speed is set to 30 km/h
(19 mph).
3. To increase the set speed, press the
RES switch up (SET+) continuously.
The set speed can be adjusted in 10
km/h (5 mph) increments. The set
speed can also be adjusted in
about 1 km/h (1 mph) increments
by pressing the RES switch up (SET
+) momentary. For example, the set
speed increases about 4 km/h (4
mph) by pressing the RES switch up
(SET+) switch 4 times.
4. To decrease the set speed, press the
RES switch down (SET-)
continuously. The set speed can be
adjusted in 10 km/h (5 mph)
increments. The set speed can also
be adjusted in about 1 km/h (1
mph) increments by pressing the
RES switch down (SET-)
momentary. For example, the set
speed decreases about 4 km/h (4
mph) by pressing the RES switch
down (SET-) 4 times.
NOTE
When the vehicle set speed is

displayed in the active driving
display/instrument cluster and speed
limit sign is not displayed, press the
RES switch to set the displayed
vehicle speed.
Manually setting the vehicle speed
limit from a speed limit sign
1. Press the LIM switch to turn the
system on.
2. Press the RES switch while the ISA
set indication is displayed on the
active driving display/instrument
cluster to set the vehicle speed limit