Mazda CX-30 2020 Owner's Manual page 28

Essential Safety Equipment
Seats
2. Adjust the steering wheel height so
that the gauges can be viewed
easily.
3. Raise the lever to securely lock the
steering wheel.
Adjusting the head restraint position
To prevent shock to the head and
neck, adjust the head restraints to their
correct positions.
Refer to Height Adjustment on page
2-15.
▼ Driving Position Memory (Power
*
Seat)
The desired driving position can be
called up after programming the
position.
The following driving positions can be
programmed.
Driver's seat position (seat slide,

height adjustment, front edge of seat
bottom, seat recline)
Refer to Adjusting the Driver's Seat
on page 2-4.
Active driving display (display

position, brightness level, display
information)
Refer to Active Driving Display on
page 4-39.
Outside mirror angle

Refer to Outside Mirrors on page
3-36.
A driving position can be programmed
to the following parts.
Position memory button

2-10
*Some models.
Transmitter used for vehicle

NOTE
Lumbar support adjustment cannot

be programmed.
Programming
1. Make sure the parking brake is on.
2. (Automatic transmission)
Make sure the selector lever is in
the P position.
3. Switch the ignition ON.
4. Adjust the following parts to the
desired conditions.
Driver's seat

Active driving display

Outside mirrors

5. Press the SET button continuously
until a sound is activated.
1. 1 button
2. 2 button
3. SET button
6. Do the following operation within 5
seconds after the sound is activated
to programme the driving position.
Programming to a position

memory button
Press the button you want to
programme, either 1 or 2 button.
Programming to the transmitter

Press the unlock button on the
transmitter.
A sound is activated when the
operation is completed correctly.