Mazda CX-30 2020 Owner's Manual page 388

When Driving
Rear View Monitor
When the temperature around the lens is high/low.

When the camera is wet such as on a rainy day or during periods of high

humidity.
When foreign material such as mud is stuck around the camera.

When the camera lens reflects sunlight or headlight beams.

The surroundings are illuminated by vehicle lights, fluorescent lights, or LED

lights (display may flicker).
Extremely small dark or white dots appear on the screen (dots may flicker).

Image display may be delayed if the temperature around the camera is low.

▼ Viewing the Display
Predicted vehicle path assist lines display type
The projected path guidance mode displays the predicted path of the vehicle after
you turn the steering wheel.
Use this mode for parking your vehicle in a parking space or garage.
a) Projected vehicle path (yellow)
These lines are displayed as a reference for the projected path of the vehicle.
The lines displaying the projected vehicle path change after you turn the steering
wheel.
b) Extended vehicle width lines (blue)
These lines indicate the vehicle's extended width.
These lines are not displayed when the vehicle's wheels are in the straight-ahead
position.
c) Distance guide lines (red)
These lines indicate the approximate distance to a point measured from the
vehicle's rear (from the end of the bumper).
The blue line indicates the point about 50 cm (19 in) from the rear bumper.
The red and yellow lines, which change position after you turn the steering wheel,
indicate the points about 50 cm (19 in) for the red line and 100 cm (39.3 in) for
the yellow lines from the rear bumper (at the centre point of each of the lines).
A degree of error occurs when the wheels are not in the straight-ahead position.
In the above illustration, the right side of the vehicle is in a position closer to the
actual distance displayed by the distance guide lines (red: about 50 cm (19 in)
4-240