Ice Chute Assembly; Ice Gate Description; Ice Chute Cover; Ice Chute Sensor - Cornelius ABS 2.0 Service Manual

I G D
CE ATE ESCRIPTION
The ice gate is a pneumatically operated "gate" that is controlled by the Beverage Interface Board. The time the gate
is open is very precise and determines the portion of ice dispensed. The gate opens and closes under pneumatic
pressure[35psi(.24Mpa)]. The gas is controlled by solenoids.
Magnet
Ice Chute
Cover
Hazardous
Label
I C C
CE HUTE OVER
The ice chute directs the ice into the cup. It can be removed for cleaning or replacement.
I C S
CE HUTE ENSOR
There is a sensor that detects when the ice chute cover is on/off. The unit will not operate when off or installed
incorrectly.
C R
YLINDER EPLACEMENT
The cylinder can be replaced by manually shutting off the air/CO
and removing the cylinder from the ice bin and ice chute assembly by removing the mounting nut.
I G S
CE ATE OLENOID
The solenoid for the ice gate is located in the pneumatic compartment can be accessed by removing the access cover
and splash panel.
© 2019, Cornelius Inc.

ICE CHUTE ASSEMBLY

Ice Chute
Stopper
Figure 82.
R
EPLACEMENT
- 47 -
Ice Chute Seal
Pneumatic
Cylinder
Sensor
Bracket
Enclosure
supply, (Back of the unit) disconnecting the tubing
2
Publication Number: 621058590SER
ABS 2.0 Service Manual