Beverage Not Sweet Enough; Beverages Not Cold (Units With Built-In Cold Plate); Agitators Turn In Opposite Directions; Ice Does Not Dispense From One Gate Assembly - Cornelius ED 300 BC Operator's Manual

Trouble

BEVERAGE NOT SWEET ENOUGH.

BEVERAGES NOT COLD (UNITS WITH BUILT–IN
COLD PLATE).

AGITATORS TURN IN OPPOSITE DIRECTIONS

ICE DOES NOT DISPENSE FROM ONE GATE
ASSEMBLY

FLAVOR SYRUPS DO NOT DISPENSE

FLAVOR DISPENSES FOR MORE THAN 1 SEC

FLAVOR DISPENSES MORE THAN .5 OZ
Contact your local syrup or beverage equipment distributor for additional information and troubleshoot-
ing of beverage system.
Probable Cause
A. Empty syrup tank.
B. Faucet brix requires adjusting.
A. Unit standing with no ice in hopper – no ice in
cold plate cabinet.
A. This is normal and is necessary for uniform ice
agitation.
A. Agitators reversed
B. Defective gate solenoid or rectifier
C. Motors wired incorrectly
A. No 24 volt power to PC board.
B. No CO2 pressure.
C. Empty syrup tank.
D. Kinked tubing.
E. Clogged inner nozzle.
F. Defective PC board.
G. Defective harness from keypad.
H. Defective Flow control.
I. Defective solenoid harness.
J. Defective keypad.
A. Dip switch settings on control board incorrect.
B. PC board defective.
C. Defective flow control.
A. Dip switch settings on control board incorrect.
B. Flow control incorrectly set.
C. PC board defective.
D. Defective flow control.
7 92059OPR