ABS 2.0 Service Manual
NOZZLE DIFFUSER REMOVAL
NOTE:Diffuser cleaning or sanitizing is recommended twice weekly.
Step
Turn nozzle clockwise (left), Than pull down,
1
the diffuser will stay in position (it is keyed only,
fits one way).
Pull diffuser down. Clean with warm soapy
water then sanitize and reinstall.
2
NOTE:Do not soak for more than 2 minute.
Seal may warp
Remove Seal from Diffuser by inserting thumb
3
into center and pulling against the 2 surfaces
to pull the seal away from the diffuser.
Line up the locating notches on inner 10circle
4
of both the Seal and Diffuser. Push the Sili-
cone Seal into the Diffuser until it sits flat.
Publication Number: 621058590SER
Table 9.
Action
- 16 -
Figure
Figure 21.
Figure 22.
Figure 23.
Figure 24.
© 2019, Cornelius Inc.