R
EASSEMBLY OF
Step
Place valve into the valve carrier.
1
NOTE: Use only Dow III or equivalent on all
O-rings
Start the solenoid at a 45 deg. angle and
ensure that rear flange of the valve fits behind
2
the wall of the carrier bracket
• Ensure that bottom o-rings seat and are
not pinched in the outlet barbs.
• Replacement
3
lubrication with
recommended.
• Black quad rings shown on previous slide.
© 2019, Cornelius Inc.
MFV V
ALVE
Action
of
o-rings
(black)
Dow 111
or equivalent is
Table 12.
and
- 21 -
ABS 2.0 Service Manual
Figure
Figure 38.
Figure 39.
Figure 40
Publication Number: 621058590SER