Splash Panel Removal - Cornelius ABS 2.0 Service Manual

S P R
PLASH ANEL
Step
Open turret door (optional remove turret
assembly) and remove the five screws holding
the splash panel, as shown in Figure 19 and
1
pull the panel forward and down to remove it.
th
NOTE: 5 screw is behind Cup lifter / grabber
A. From the Technician Screen select Diagnos-
tics menu, In this menu select picker control
and feedback button, in this screen select
the Top button to move picker to up. This is
to allow access to the screw behind the
2
Lifter/Grabber assembly.
B. If no power/air in the unit, directly up/down
the Picker by hand.
3 Remove outer nozzle and diffuser before taking off panel.
4 Gently pull the splash panel forward from the bottom and move the lifter/grabber up to fully remove.
5 Replace the splash panels onto the unit.
© 2019, Cornelius Inc.
EMOVAL
Action
Table 8.
MOUNTING SCREW
- 15 -
ABS 2.0 Service Manual
Figure
S
CREW
Figure 19.
Figure 20.
Publication Number: 621058590SER