Cornelius ABS 2.0 Service Manual page 23

Step
This side up – you should be able to feel the
5
raised edges of the seal holes when you re-
insert into nozzle.
With the Seal side up, align the notches in the
6
Diffuser with the ribs on Nozzle Base. Push the
Diffuser up into Nozzle Base.
The Diffuser will stay in place if correctly
7
installed.
While pushing upwards, rotate the Nozzle
8
towards the back of the unit.(CCW).
The Nozzle should
9
should sit even with the unit
© 2019, Cornelius Inc.
Table 9. (Continued)
Action
NOT sit on an angle. It
- 17 -
ABS 2.0 Service Manual
Figure
Figure 25.
Figure 26.
Figure 27.
Figure 28.
Figure 29.
Publication Number: 621058590SER