Cup Turret System; Description Of Operation; Cup Holder Default Positions - Cornelius ABS 2.0 Service Manual

D of O
ESCRIPTION
The cup turret mechanism consists of a column (six sided bracket), that will hold six cup holder assembles. An electric
motor and gear box, a 24" drive shaft, shrouded with a protective sleeve.
The cup turret is activated by a command from the POS to the ABS 2.0. The cup turret rotates so that the correct cup
size is at the cup drop position. The cup is then pulled and placed into the carousel.
When the cup turret rotates to a selected cup size, it will rotate in either direction (clockwise or counterclockwise),
whichever distance is closest to the extract position.
C H D
UP OLDER EFAULT
The cup turret Holder default positions are setup in the ABS 2.0 using Nos. 1 to 6. The default positions are shown.
CUP HOLDER
© 2019, Cornelius Inc.

CUP TURRET SYSTEM

PERATION
P
OSITIONS
Figure 75.
6 - SIDED COLUMN
- 43 -
ABS 2.0 Service Manual
Publication Number: 621058590SER