Set Overall Water Valve - Cornelius ABS 2.0 Service Manual

Automated beverage system
Hide thumbs Also See for ABS 2.0:
Table of Contents

Advertisement

ABS 2.0 Service Manual
S
O
W
ET
VERALL
ATER
NOTE: This is the step that adjusts the pour times of all beverages dispensed from the ABS 2.0. If this step
is not completed, then drinks will either over- or under-pour depending on the flow rate adjustment
.
of the valves
Step
After both CW valves are adjusted, do another
4 second dispense and measure the volume
dispensed in the ratio cup. Select Update
Actual Water Volume in oz and using the key-
1
pad enter the volume measured in the ratio
cup and press the green arrow.
Press Save and then press Update Beverage
Dispense Times. The dispense times for all
2
drink sizes and types are now updated based
on the set flow rate.
3
Repeat steps 1 & 2 for the plain water valves PW1 & PW2.
Publication Number: 621058590SER
V
ALVE
Table 15.
Action
- 28 -
Figure
Figure 53.
Figure 54.
Figure 55.
© 2019, Cornelius Inc.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents