MULTI-FLAVOR VALVE CONFIGURATION
!
WARNING:
Disconnect power to the unit before accessing the MFV valve.
Step
Each round shutoff (Spindle) needs to be
pressed towards down as shown as in Figure
1.
31 to allow fluid to flow past the back-block into
the valves.
Press the bottom snap (Dovetail) of back-block
2.
towards down as indicated in Figure 32.
3.
MFV Valve Module placed on the back-block.
4.
Back-block layout behind each valve bank.
© 2019, Cornelius Inc.
Table 10.
Action
- 19 -
ABS 2.0 Service Manual
Figure
Figure 31
Figure 32.
Figure 33.
Figure 34.
Publication Number: 621058590SER