IDC Pro 255 Service Manual
S
P
R
PLASH
ANEL
Step
Open the display panel and remove the
thumb-screw holding the upper splash
1
panel as shown in Figure 31 and pull the
panel forward and down to remove it.
Loosen the two screws from the top two
corners of the splash panel as shown in
2
Figure 32, slide the panel upward to dis-
engage the two bottom tabs and pull the
splash panel forward to remove it.
3
Replace the splash panels onto the unit.
I
C
R
CE
HUTE
EMOVAL
Step
Open the display panel and remove the
thumbscrew holding the upper splash
1
panel as shown in Figure 33 and pull the
panel forward and down to remove it to
gain access for Ice chute.
Publication Number: 621058649SER
EMOVAL
Action
Action
Table 11.
Upper Splash panel
MOUNTING SCREW
Table 12.
Upper Splash panel
- 18 -
S
CREW
Pull downwards
Figure 31.
Figure 32.
Screw
Pull downwards
Figure 33.
© 2016, Cornelius Inc.