Download
Share
Print this page
Cornelius ABS 2.0 Maintenance Manual
  1. Manuals
  2. Brands
  3. Cornelius Manuals
  4. Commercial Food Equipment
  5. ABS 2.0
  6. Maintenance manual

Cornelius ABS 2.0 Maintenance Manual

Hide thumbs Also See for ABS 2.0:
1
2
3
4

Advertisement

Quick Links

Download this manual
Clean and sanitize conveyor assembly, drip
tray and nozzle parts
Why
To break the bacteria cycle and keep the serving and beverage nozzle clean
Time required
5 minutes to prepare
Time of day
At close.
Hazard icons
Tools and Supplies
Bucket with McD HA
Sanitized Towels
detergent solution
Procedure:
Switch the ABS to
1
MANUAL Mode:
On the Left hand
Display, press the
MANUAL Button.
Tools Required
2
-McD Spray Bottle
with HA detergent
-Paper Towel
-Clean Cloth
-Carbonated Water
-McD DR Sanitizer
Spray Bottle
-Sanitizing Bucket
-Clean Sanitized
Cloth.
Cleaning
3
Preparation
Remove cover by
loosening the 3
thumb screws and
lifting it upwards
15 minutes to complete
For 24-hour restaurants: during low-volume periods at
night
Small Tray
McD HA Detergent
Spray Bottle
4
5
6
7
DAILY
McD DR Sanitizer
Paper Towels
Spray Bottle
Remove the
conveyor by lifting it
upwards.
NOTE: Avoid
carrying conveyor
by a cup holder.
Removing the cup
rest.
Remove the cup rest
by lifting it upwards.
Disassemble the
Nozzle
Remove the outer
nozzle housing by
rotating it in the
clockwise direction
and then pulling
down.
Remove the diffuser
by pulling it vertically
downward.
©McDonald's Corporation · Planned Maintenance Manual
BE 94 D1
Page 1 of 4

Advertisement

loading

Related Manuals for Cornelius ABS 2.0

Summary of Contents for Cornelius ABS 2.0

  • Page 1 Clean and sanitize conveyor assembly, drip DAILY BE 94 D1 tray and nozzle parts To break the bacteria cycle and keep the serving and beverage nozzle clean Time required 5 minutes to prepare 15 minutes to complete Time of day At close.
  • Page 2 Clean and sanitize conveyor assembly, drip tray and nozzle parts (continued) Clean the Drip Tray. Back Room Cleaning. Make sure the water deflector is properly Collect grill, installed; this will help conveyor, and all prevent motor nozzle components failures. (Order and bring to back replacement if the room.
  • Page 3 Clean and sanitize conveyor assembly, drip tray and nozzle parts (continued) Rinse the nozzle Return parts to components in machine. lukewarm, clean water to remove Collect cup rest, soapy residue. conveyor and nozzle components and bring to the machine Spray sanitizer on the nozzle, diffuser, and gasket.
  • Page 4 Clean and sanitize conveyor assembly, drip tray and nozzle parts (continued) Reassemble the syrup diffuser. Reinstall the diffuser gasket in the diffuser by aligning the square notch on the gasket. NOTE: Ensure gasket is seated properly and correct side is facing upwards.