2. Use the cursor keys to select Phone User.
3. Use the cursor keys to select Phone Screen Settings.
4. Use the up and down cursor keys to highlight Auto Return.
5. Press the Change soft key to change the setting or use the left or right cursor keys.
• Disabled - Do not use the inactivity timer.
• 30/60 - Apply the inactivity timer after the selected number of seconds.
6. Press Save.
Related links
Display Controls
on page 139
Quick Touch Lines
For 9621 and 9641 phones, the phone can display one or two rows of fixed buttons across the
bottom of the call display screen, each row containing four buttons. 'Fixed' means the rows do not
scroll out of view when the rest of the screen is scrolled.
Your system administrator can select how many lines the phone shows by default. However, you
can then select the number that you prefer or to have no lines.
Related links
Display Controls
on page 139
Setting the Number of Quick Touch Lines
Configuring Quick Touch Line Buttons
Setting the Number of Quick Touch Lines
Your system administrator can select how many lines the phone shows by default. However, you
can then select the number that you prefer or to have no lines.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
2. Use the cursor keys to select Phone User.
3. Use the cursor keys to select Phone Screen Settings.
4. Select Quick Touch Lines.
5. The current settings is shown:
• Off – No quick touch rows.
April 2020
on page 143
on page 144
PHONE key and then press Features.
9600 Series Phone User Guide
Comments on this document? infodev@avaya.com
Quick Touch Lines
143