Avaya 9600 Series User Manual page 165

Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
2. Use the cursor keys to select Phone User.
3. Use the cursor keys to select System Administration.
• This option is only present if you have been configured as a system phone user by your
system administrator.
4. Enter your security PIN (login code) and press Done.
5. Use the up and down cursor keys to scroll the display to the option Memory Card (IP500/
IP500 V2) or File System (Server Edition). The option shown varies depending on the type
of telephone system.
6. The menu lists the current state of the system's memory cards and the actions that you
can perform on the card.
7. The status of each memory card listed is either No Card, Active, or Inactive. Entries are
only listed for the types of cards that are supported:
• CF - This refers to the optional compact flash card that can be fitted toIP500 systems.
• System - This refers to the first SD memory card that must be fitted to IP500 V2
systems.
• Option - This refers to the second optional SD memory card that can be fitted to IP500
V2 systems.
8. The actions that can be performed on the memory cards are listed below the status of the
card or cards. The actions available depend type of card and its current status. After
selecting an action, you can then select the card on which you want the action performed
and then press the Confirm soft key to start the action.
• Shut Down (IP500 V2) – This option is available when an Active card is present. It
allows the card to be made inactive.
• Start Up – This option is available when an Inactive card is present. It allows the card
to be made active again.
• System Backup (IP500 V2/Server Edition) – This option is available when a System
card is present and active. It allows the telephone system's current configuration
settings to be copied to a backup file on the memory card.
• System Restore – This option is available when a System card is present and active. It
overwrites the telephone system's current configuration settings with those from a
backup file on the card.
• Upgrade Config (IP500 V2) – Copy configuration files from an Option card to the
System card in the system control unit.
• Upgrade Binaries (IP500 V2) – Copy software files from an Option card to the System
card in the system control unit.
April 2020
PHONE key and then press Features.
9600 Series Phone User Guide
Comments on this document? infodev@avaya.com
Managing the Memory Cards
165