Auto Display Waiting Call; Inactivity Timer (Auto-Return) - Avaya 9600 Series User Manual

Display Controls
6. To select the currently highlighted language, press Select.
7. When completed, press Save.
8. Press Back/Exit to exit the menus.
Related links
Display Controls on page 139

Auto Display Waiting Call

By default, when you are connected on a call, the phone shows details of that call and soft key
actions you can perform for that call. In order to see details of a waiting call, you need to scroll the
display using the up and down cursor buttons.
You can opt to have the phone automatically show details of a waiting call when one alerts the
phone and soft key actions that you can perform on the waiting call. If you use the scroll keys to
return the display focus to the currently connected call, the focus automatically returns to the
waiting call after a few seconds.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
2. Use cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Auto Display Waiting Call.
4. Press the Change button to select On or Off.
5. Press Save.
Related links
Display Controls on page 139

Inactivity Timer (Auto-Return)

You can set a timer to return the phone to its normal call display after a set period of phone
inactivity.
Note that the time is not applied to the
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
April 2020
PHONE key and then press Features.
and Visual Voice menus.
PHONE key and then press Features.
9600 Series Phone User Guide
Comments on this document? infodev@avaya.com
142