Inactivity Timer (Auto Return); Quick Touch Lines - Avaya 9600 Series User Manual

18.7.8 Inactivity Timer (Auto Return)

You can set a timer which will return the phone to its normal call display after a set period of phone inactivity. By default
the phone will be set to auto return after 60 seconds.
Note that the timer is not applied to all menus. For example it is not applied to the A-menu and to the Visual Voice
menu. It is also not applied to the System Admin section of the Features menus.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
3. Use the up and down
4. Use the up and down
5. Press Change to change the setting.
· Disabled
Do not use the inactivity timer.
· 30 / 60
Apply the inactivity timer after the selected number of seconds.
6. Press the Save soft key.

18.7.9 Quick Touch Lines

For 9621 and 9641 phones, the phone can display one or two rows of fixed buttons across the bottom of the call display
screen, each row containing four buttons. 'Fixed' means the rows do not scroll out of view when the rest of the screen is
scrolled.
Your system administrator can select how many lines the phone shows by default. However, you can then select the
number that you prefer or to have no lines.
Note: Only users with 'self administer' privileges can configure quick touch line buttons. <<<need TUI Self
Administration privilege to change this setting>>>
Quick touch line buttons match the
only be configured by an administrator. The available user-programmable features include:
· Abbreviated Dial
· Absence Text
· Call Forward All
· Call Pickup
If you attempt to configure a quick touch line button to a feature not supported by IP Office, the display for that button
will read "Invalid." The assigned quick touch features are displayed left to right, top to bottom.
To activate quick touch lines:
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
3. Use the up and down
4. Use the up and down
5. Press Change to change the setting.
· Off = No quick touch rows.
· 1 = Display one row of four quick touch buttons across the bottom.
· 2 = Display two rows of four quick touch buttons across the bottom.
· Auto = Display 1 row when using a 9621, 2 rows when using a 9641.
6. Press the Save soft key.
To configure a quick touch line button:
2. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
3. Use the up and down
9600 Series User Guide
IP Office 9.0
arrow keys to highlight Phone User. Press Select.
arrow keys to highlight Phone Screen Settings. Press Select.
arrow keys to scroll the display to Auto Return(s).
programmable feature buttons
· Call Pickup Any
· Page
· Self Administer
· Send All Calls
arrow keys to highlight Phone User. Press Select.
arrow keys to highlight Phone Screen Settings. Press Select.
arrow keys to scroll the display to the option Quick Touch Lines.
arrow keys to highlight Phone User. Press Select.
Phone Settings: Display Controls
PHONE key and then press the
supported by IP Office, but certain features can
104
PHONE key and then press the
PHONE key and then press the
Page 123
Issue 06e (03 February 2014)