Assisted Setup - Omron MicroHAWK V320-F User Manual

3 Start
3-2

Assisted Setup

When you click the Assisted Setup button in the Start view, a dialog will appear asking you a series of
application-based questions. Based on your answers, WebLink generates your initial setup
automatically. Once the setup is created, you can fine-tune its parameters in the Setup view.
The Assisted Setup dialog is designed to be logical and intuitive, and follows this sequence:
• You are asked which code types you will be reading in your application. Code types can be added by
clicking directly in the code type field and selecting them from a dropdown menu.
• Then you are asked how many codes you need to read at once (in a single read cycle). Type the
number of codes you need to read directly in the text field or select a number using the up and down
arrows.
• You are then given a selection of four application types, which represent the available selections in
the Cycle area of the left panel in the Setup view. The icons represent the Presentation,
Continuous, Triggered, and Start / Stop Cycle Types.
• The next question is whether or not you need the decoded data to match an existing string of data.
This enables or disables Match String.
• If the answer to the previous question is Yes, a follow-up question appears asking for the exact
output string that the decoded data must match. If the answer to the previous question is No, the
follow-up question does not appear.
• Finally, you are asked if you want to rename the reader. If Yes, a text field appears in which you can
type the reader's new name. The reader's MAC ID is also shown to the right of the text field.
Click Create Setup to configure your WebLink setup automatically based on your answers to the
Assisted Setup questions.
Note: Reader settings are defaulted when Assisted Setup settings take effect.
3-4
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual