Omron MicroHAWK V320-F User Manual page 357

Appendices
H-11-3 Number to Output On
Usage:
Definition:
Serial Cmd:
Default:
Options:
H-11-4 Decodes per Trigger Threshold
Definition:
Serial Cmd:
Default:
Options:
H-20
Example: If Number to Output On is set to 3 and Trend Analysis Mode is
set to No-Read, then the output will not be activated until 3 No-Reads have
occurred.
Sets the number of Trend Analysis Mode events (mismatches, No-Reads, or
reads/trigger as configured by Trend Analysis Mode) to occur within the trigger
evaluation period before activating the associated output.
<K780,trend analysis mode,trigger evaluation period,number to output on,
decodes per trigger threshold>
0
0 to 255
The appropriate output will be activated if, at the end of the read cycle, the
symbol decode count is below this setting.
Note: To activate this feature the reader must be in Decodes per Trigger
mode. To put the reader in this mode during the read cycle and the Trend
Analysis operation, the Decodes per Trigger status in the quality settings must
be enabled. Enabling this setting will also append the decode count to the
symbol data.
<K780,trend analysis mode,trigger evaluation period,number to output on,
decodes per trigger threshold>
0
0 to 65535
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual