Omron MicroHAWK V320-F User Manual page 203

Appendices
Mounting Block
V430-AM1 (Unit: [mm])
Mounting holes
Cap screw
M3x6
Note:
• Mounting the MicroHAWK V430-F requires the use of the front set of mounting holes, closest to the
window.
• As the material is aluminum alloy, there is no isolation effect.
Although the body case of V430 is connected to FG (Frame ground), the FG is isolated from the
internal electric circuit GND (0 VDC). If noise affects it, take measures by referencing Grounding and
Power section.
A-28
Material: Aluminum alloy
Thickness: 6.4mm
Accessories: Cap Screws (M3×6)(2)
The following accessories are not used with
the MicroHAWK V430-F-series:
Cap Screws (M2×8)(2)
44.5
22.2
3.2
6.2
12.7
6.2
ø2.4 THRU
ø4.4 2.2
(2X)
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
6.4
1/4-20 THRU
4.4
3.2
ø6.5 (2X)
25.4
ø3.4 (2X)
Mounting bracket