Omron MicroHAWK V320-F User Manual page 351

Appendices
H-8-3 Load Configuration Database
Definition:
Serial Cmd:
Default:
Options:
H-8-4 Save for Power-On
Definition:
Serial Cmd:
Default:
Options:
H-14
Allows the user to load the Configuration Database with calibration results.
When the user performs a calibration using the Setup button, all the
database entries are moved down one index and the results of the calibration
are saved to index 1. The results will be saved as current settings as well.
<K770,global status,default on power-on,load Configuration Database,
save for power-on>
Enabled
0 = Disabled 1 = Enabled
If enabled, after calibration is complete, all parameters will be saved for
power-on.
<K770,global status,default on power-on,load Configuration Database, save
for power-on>
Disabled
0 = Disabled 1 = Enabled
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual