Disable Manual Hose Mode - Graco Reactor 2 E-30 Operation

Manual Hose Mode
5. Navigate back to the Run Mode Home screen.
The hose now displays a current instead of a
temperature.
Note
Until the RTD sensor is repaired, the
T6DH sensor error alarm will display
each time the system is powered up.
52
Disable Manual Manual Hose Hose Mode
Disable Disable Manual Hose
Manual Hose Mode is automatically disabled when
the system detects a valid FTS (Fluid Temperature
Sensor) in the hose.
To manually disable Manual Hose Mode, enter the
Setup Mode and navigate to System 2 Screen.
Deselect Enable Manual Hose Mode.
Mode
Mode
333023M