Home - System Off; Home - System Active; Home - System With Error - Graco Reactor 2 E-30 Operation

Run Mode
Home — — — System System Off
Home Home System
This is the home screen when the system is off.
This screen displays actual temperatures, actual
pressures at the fluid manifold, jog speed, coolant
temperature, and number of cycles.
38
Off
Off
Home — — — System System Active
Home Home System
When the system is active, the home screen displays
actual temperature for heat zones, actual pressures
at the fluid manifold, coolant temperature, jog speed,
the number of cycles, along with all associated
control soft keys.
Use this screen to turn on heat zones, view
coolant temperature, start the proportioner, stop the
proportioner, park the component A pump, enter jog
mode, and clear cycles.
NOTE: The screen shown displays inlet sensor
NOTE: NOTE:
temperatures and pressures. These will not be
shown on models without inlet sensors.
NOTE: The screen shown displays flow bars and the
NOTE: NOTE:
flow ratio. The vertical bars indicate the level of flow
through the meters. The numerical ratio indicates
the ratio of A-side component to B-side component
(ISO : RES). For example, if the ratio is 1.10 : 1,
the proportioner is pumping more A-side component
(ISO) than B-side component (RES). If the ratio is
0.90 : 1, the proportioner is pumping more B-side
component (RES) than A-side component (ISO).
Home — — — System Home Home System With System
Active errors are shown in the status bar. The error
code, alarm bell, and description of the error will
scroll in the status bar.
1. Press to acknowledge the error.
2. See for corrective action.
Active
Active
With Error With Error Error
333023M