Graco Reactor 2 E-30 Operation page 5

THERMAL THERMAL THERMAL EXPANSION
Fluids subjected to heat in confined spaces, including hoses, can create a rapid rise in pressure
due to the thermal expansion. Over-pressurization can result in equipment rupture and serious
injury.
• Open a valve to relieve the fluid expansion during heating.
• Replace hoses proactively at regular intervals based on your operating conditions.
PRESSURIZED PRESSURIZED PRESSURIZED ALUMINUM
Use of fluids that are incompatible with aluminum in pressurized equipment can cause serious
chemical reaction and equipment rupture. Failure to follow this warning can result in death,
serious injury, or property damage.
• Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon
solvents or fluids containing such solvents.
• Many other fluids may contain chemicals that can react with aluminum. Contact your material
supplier for compatibility.
PLASTIC PARTS
PLASTIC PLASTIC
Many solvents can degrade plastic parts and cause them to fail, which could cause serious
injury or property damage.
• Use only compatible water-based solvents to clean plastic structural or pressure-containing
parts.
• See Technical Technical Data Technical
solvent manufacturer's MSDSs and recommendations.
333023M
WARNING WARNING WARNING
EXPANSION HAZARD EXPANSION HAZARD HAZARD
ALUMINUM PARTS ALUMINUM PARTS PARTS HAZARD
PARTS CLEANING CLEANING SOLVENT SOLVENT HAZARD
PARTS CLEANING SOLVENT
Data Data in this and all other equipment instruction manuals. Read fluid and
HAZARD HAZARD
HAZARD
HAZARD
Warnings
5