Advanced Setup Screens; Advanced Screen 1 - General; Advanced Screen 2 - Units; Advanced Screen 3 - Usb - Graco Reactor 2 E-30 Operation

Advanced Setup Screens

Advanced Setup Setup Screens
Advanced Advanced Setup
Advanced setup screens enable users to set units, adjust values, set formats, and view software information
for each component. Press
Advanced setup screen, press
to exit edit mode.
Note
Users must be out of edit mode to scroll
through the Advanced setup screens.
Advanced Screen Screen 1 1 1 — — — General
Advanced Advanced Screen
Use this screen to set the language, date format,
current date, time, setup screens password (0000 –
for none) or (0001 to 9999), and screen saver delay.
Advanced Screen Screen 2 2 2 — — — Units
Advanced Advanced Screen
Use this screen to set the temperature units, pressure
units, volume units, and cycle units (pump cycles or
volume).
34
Screens
Screens
to scroll through the Advanced setup screens, Once in the desired
to access the fields and make changes. When changes are complete press
General
General
Units
Units
Advanced Screen Advanced Advanced Screen 3 3 3 — — — USB Screen
Use this screen to enable USB downloads/uploads,
enable a logs 90% full advisory, enter the maximum
number of days to download data, enable specifying
date range of data to download, and how frequently
USB logs are recorded. See .
Advanced Screen Screen 4—
Advanced Advanced Screen
This screen displays the software part number and
software version for the Advanced Display Module,
USB Configuration, Motor Control Module, and
Temperature Control Modules.
USB USB
4— Software Software
4— Software
333023M