Errors; View Errors; Troubleshoot Errors - Graco Reactor 2 E-30 Operation

Errors

Errors
Errors Errors

View Errors

Errors
View View Errors
When an error occurs the error information screen
displays the active error code and description.
The error code, alarm bell, and active errors will scroll
in the status bar. For a list of the ten most recent
errors see Troubleshooting, page
are stored in the error log and displayed on the Error
and Troubleshooting screens on the ADM.
There are three types of errors that can occur. Errors
are indicated on the display as well as by the light
tower (optional).
Alarms are indicated by
a parameter critical to the process has reached a
level requiring the system to stop. The alarm needs
to be addressed immediately.
Deviations are indicated by
indicates a parameter critical to the process has
reached a level requiring attention, but not sufficient
enough to stop the system at this time.
Advisories are indicated by
indicates a parameter that is not immediately critical
to the process. The advisory needs attention to
prevent more serious issues in the future.
To diagnose the active error, see
Troubleshoot Errors, page
62
63. Error codes
. This condition indicates
. This condition
. This condition
62.

Troubleshoot Errors

Errors
Troubleshoot Troubleshoot Errors
To troubleshoot the error:
1. Press the soft key next to "Help With This Error"
for help with the active error.
Note
Press or
previously displayed screen.
2. The QR code screen will be displayed. Scan
the QR code with your smart phone to be sent
directly to online troubleshooting for the active
error code. Otherwise, manually navigate to
http://help.graco.com and search for the active
error.
3. If no internet connection is available, see
Error Codes and Troubleshooting, page 63
causes and solutions for each error code.
to return to the
for
333023M