Targets; Maintenance; Cycles - Graco Reactor 2 E-30 Operation

Targets

Targets Targets
Use this screen to define the setpoints for the
A Component Temperature, B Component
Temperature, heated hose temperature, and
pressure.
Maximum A A A and Maximum Maximum and B B B temperature: and temperature: 190°F (88°C) temperature:
Maximum heated heated hose hose temperature:
Maximum Maximum heated hose
above the highest A or B temperature setpoint or
180°F (82°C).
Note
If the remote display module kit is used,
these setpoints can be modified at the gun.
333023M
temperature: 10°F (5°C)
temperature:

Maintenance

Maintenance Maintenance
Use this screen to view daily and lifetime cycles or
gallons that have been pumped and gallons or liters
remaining in the drums.
The lifetime value is the number of pump cycles or
gallons since the first time the ADM was turned on.
The daily value automatically resets at midnight.
The manual value is the counter that can be manually
reset. Press and hold to reset manual counter.

Cycles

Cycles Cycles
This screen shows daily cycles and gallons that have
been sprayed for the day.
All information listed on this screen can be
downloaded on a USB flash drive.
Run Mode
39