Graco Reactor 2 E-30 Operation page 32

Advanced Display Module (ADM) Operation
Setup Mode Mode
Setup Setup Mode
The ADM will start in the Run screens at the Home screen. From the Run screens, press
access the Setup screens. The system defaults with no password, entered as 0000. Enter the
current password then press
Setup Screens Navigation Diagram, page
Set Set Password Set Password Password
Set a password to allow Setup screen access, see
from 0001 to 9999. To remove the password, enter the current password in the Advanced Screen – General
screen and change the password to 0000.
From the Setup screens, press
32
. Press to navigate through the Setup Mode screens. See
45.
Advanced Screen 1 – General, page
to return to the Run screens.
to
34. Enter any number
333023M