Converting 1 To 2-Channel Version (1.6-Inch Hd Subsystem) - Fujitsu PRIMERGY H200 Manual

Appendix

Converting 1 to 2-channel version (1.6-inch HD subsystem)

10.3 Converting 1 to 2-channel version
(1.6-inch HD subsystem)
I
For the accessible 5¼-inch drives or for the second SCSI backplane (see
section "Internal SCSI configurations (1-channel version)" on page 92),
an additional disk array/SCSI controller must be installed.
The SCSI backplanes are wired as shown in figure 48 (1-channel configu-
ration).
I
The cabling of the SCSI backplanes must be changed.
Figure 48: 1-channel configuration 1.6-inch hard disk subsystems (internal cabling)
U41147-J-Z156-2-76
101