Table of Contents
Advertisement
Appendix
Ê Remove the two fastening screws (1) which attach the base plate of the
switch to the assembly frame.
Ê Remove the intrusion switch.
Figure 60: Disconnecting the control panel cable
Ê Disconnect the data cable for the LCD control panel from the power
backplane (connector X6, accessible between the separator wall and the
PCI slot cover; see also figure 62 on page 116).
Figure 61: Removing the cages
U41147-J-Z156-2-76
Converting a floorstand model into a rack model
115
Advertisement
Table of Contents
