Fujitsu PRIMERGY H200 Manual page 88

Accessible drives
Figure 30: Installing the accessible
Ê Slide the drive into the cage (1), and mount it with two screws on each
side (2).
If the new drive should be connected to the 16-bit bus, the drive adapter (a) in
figure 33 on page 79 on the back side of the cage must be exchanged:
Figure 31: Removing the drive adapter
Ê Loosen the two screws, and remove the drive adapter for the 8-bit SCSI port
with the corresponding cables, and mount the drive adapter for the 16-bit
SCSI port.
78
System components and expansions
5¼-inch
drive
U41147-J-Z156-2-76