Table of Contents
Advertisement
Installation
Figure 3: Securing the carrier rails
Ê Secure the two carrier rails left and right on the support uprights and on the
support bracket in the rack using the No. 5 Allen key provided. Please note
that the guide nubs of the rails next to the spring nuts must fit into the holes
in the support uprights and in the support bracket and that the telescope bar
must afterwards be able to extend fully to the front.
Figure 4: Pulling the telescope bars out toward the front
Ê Pull the mounted telescope bars completely out toward the front. They must
click into place so that you can no longer push them back.
U41147-J-Z156-2-76
Installing the rack model
27
Advertisement
Table of Contents
