Notes On Mounting In The Rack; Transporting The Server - Fujitsu PRIMERGY H200 Manual

Important notes
specified by Fujitsu Siemens Computers. The correction of interferences
caused by such unauthorized modification, substitution, or attachment will be
the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to
any and all optional peripheral or host devices. Failure to do so may violate FCC
rules.
2.4

Notes on mounting in the rack

For safety reasons due to the weight and size of the server, at least two
people are required to install the rack model.
When connecting and disconnecting cables, observe the notes in the
documentation for your PRIMERGY system and the comments in the
"Important notes" chapter in the 19-inch rack operating manual supplied with
the rack.
Ensure that the anti-tilt bracket is correctly mounted when you set up the
rack.
For safety reasons, no more than one unit may be withdrawn from the rack
at any one time during installation and maintenance work.
If more than one unit is withdrawn from the rack at any one time, there is a
danger that the rack will tilt forward.
The power supply to the rack must be installed by an authorized specialist
(electrician).
2.5

Transporting the server

V
CAUTION!
Transport the server only in its original packaging or in a packaging
which protects it from knocks and jolts. Do not unpack the server until all
transport maneuvers are completed.
If you need to lift or transport the server, ask someone to help you.
U41147-J-Z156-2-76
Notes on mounting in the rack
19