Fujitsu PRIMERGY H200 Manual page 90

Accessible drives
Figure 34: Cabling for the 16-bit SCSI bus (a: drive adapter)
I
In order to be able to reconnect the CD-ROM drive or another 8-bit drive
to the 16-bit SCSI bus, you must use a 68 to 50-pin SCSI adapter (1).
Figure 35: Mounting the cage
Ê Slide the cage into the enclosure (1), and screw it on with the knurled screws
(2).
Ê Close the server again (see chapter "Opening and closing the server" on
page 47).
Removing is done in the reverse order.
80
System components and expansions
U41147-J-Z156-2-76