Table of Contents
Advertisement
Installing the rack model
Figure 5: Mounting the server in the rack
Ê Place the server onto the two projecting telescope bars. Make sure that the
two metal noses (1) protrude over and grip the bars.
Ê Adjust the server so that the bore holes of the telescope bars and of the
server line up. Keep the telescope bars engaged.
Ê Screw the telescope bars to the server on the left and right (six screws
altogether).
The following steps require only one person.
Figure 6: Telescope bar with safety spring
Ê Press in the safety springs (1) on both telescope bars.
28
Installation
U41147-J-Z156-2-76
Advertisement
Table of Contents
