Installation
Figure 7: Fastening the server
Ê Slide the system unit into the rack (1).
Ê Fasten the system unit to the rack using the four knurled screws (2).
Remove in the reverse order.
3.5
Connecting devices to the rack model
The ports for external devices are on the rear of the server. Which ports are
available on your server depend on the boards installed.
The standard ports are indicated by symbols (see figure 8 on page 30) and by
color-coding for the connectors:
1 =
Mouse port (green)
2 =
CAN bus port
3 =
Serial port COM2 (turquoise)
4 =
USB 1 (Universal Serial Bus)
port (black)
5 =
Parallel port / LPT printer port
(burgundy)
U41147-J-Z156-2-76
Connecting devices to the rack model
6 = LAN port
7 = Monitor port (blue)
8 = USB 2 (Universal Serial Bus) port
(black)
9 = Serial port COM1 (turquoise)
10 = Keyboard port (purple)
11 = U3W SCSI port (LVD) optional
29