Table of Contents
Advertisement
Installation
3.3
Installing the floorstand model
Position the server at the intended location.
Note the following:
– Do not expose the device to direct sunlight.
– Ensure that minimum clearances for operation and maintenance are
observed.
– The rear of the server must be accessible in order to connect it to external
devices.
– The power plug must be easily and safely accessible.
– To ensure sufficient ventilation of the system, a minimum clearance of
200 mm must be provided at the front and the rear of the server.
3.3.1
Mounting the front doors
The doors are delivered separately.
Ê Unpack the front doors.
Figure 2: Mounting the front doors
Ê Insert the front door in the door hinges as shown (1 + 2).
U41147-J-Z156-2-76
Installing the floorstand model
25
Advertisement
Table of Contents
