Chicco Fold & Go i-Size Instructions Manual page 23

CHECKING THE CONDITION OF THE COM-
PONENTS
It is recommended to regularly check the condi-
tion of the following components to make sure
they are not damaged or worn:
• fabric cover: check that the padding does not
come out from the seams. Check the condi-
tion of the seams: they must always be intact
and undamaged.
• plastic parts: check that the plastic parts are
not worn out, damaged or faded.
WARNING! If the child car seat is damaged,
deformed or excessively worn, it must be re-
placed, as its original safety features may have
been compromised.
STORING THE PRODUCT
When it is not fitted in the car, it is recommend-
ed to store the child car seat in a dry place,
away from sources of heat and to protect it
from dust, humidity and direct sunlight.
DISPOSING OF THE PRODUCT
When the child car seat no longer complies
with the original safety standards, stop using it
and dispose of it at an appropriate collection
point. Dispose of the child car seat always fol-
lowing environmental rules and regulations
adopted within the country of use.
WARRANTY
The product is guaranteed against any con-
formity defect in normal conditions of use as
stated in the instructions. Therefore, the war-
ranty does not apply in the case of damage
caused by improper use, wear or accidental
events. For the duration of the warranty on
conformity defects please refer to the specific
provisions of applicable national laws in the
country of purchase, where appropriate.
23