Theory of Operation Ver1.0 Feb.2006
22.1.3
Area discrimination
To make a copy of the original under the correct condition (to make a correct filter processing), check the read
section to see if it is a character or a dot picture, and use the results at the image processing unit at the later
stage.
22.1.4
Brightness/density conversion
The signal obtained after the shading correction is a signal corresponding to the light reflected from the original,
and this is generally called a brightness signal. In this brightness/density conversion section, the brightness sig-
nal is converted in density as shown in the graph below.
255
0
Brightness
22. IMAGE PROCESSING
1024
50gat2c094na
91