Menu Navigation - Interlogix Simon XT Installation Manual

Menu navigation

Each menu contains a list of options and/or submenus. Press the scroll up/down
buttons to navigate up and down the list of options and submenus in that menu.
Pressing the Enter key after navigating to an option selects that option for editing
and flashes the current value. Pressing the Enter key after navigating to a
submenu enters that submenu, making a new list of options accessible. Pressing
STATUS exits a menu and goes to the next higher level.
Programming options are arranged in a menu structure as outlined in Table 10
below. The top menu contains several features, as well as the System
programming menu. When accessing the System programming or System tests
menu, the panel prompts you to enter an access code. To continue, enter the
dealer code or installer code, then press Enter.
To program an option, first navigate to that option until it is displayed, then press
Enter. The option value will start flashing, indicating that it is ready to be
changed. Use the scroll keys or enter a numerical value to change the option,
then press the Enter key to save the change.
Table 10: Simon XT menu structure
Set Clock (system time)
Set Date
Chime
Special Chime
System Tests
System Programming
Simon XT Installation Manual
Sensor Test
Communication Test
System Download
Access Codes
Security
Phone Numbers
Timers
Siren Options
Dealer Code
Master Code
User Codes 1 to 8
Duress Code
Downloader Enable
Phone Number 4
Latchkey Time
Panel Piezo Beeps
Panel Voice
Panel Piezo Alarms
Status Beep Volume
Speaker Volume
33