Interlogix Simon XT Installation Manual page 57

Function Default
VOX mic gain 24
VOX mic gain 64
rng
Manual mic gain 64
Light control (optional)
If your system uses optional X10 modules, you can program them to control
lights.
Note: This feature has not been investigated for use by UL.
X10 module operation
Use the following procedure to program X10 module operations into panel
memory.
To program the housecode:
1. Press the scroll buttons until the panel displays System programming.
2. Press Enter. The panel displays Enter code.
3. Enter your access code and press Enter. The panel displays Access codes.
4. Press the scroll buttons until the panel displays Light control.
5. Press Enter. The panel displays Set entry lights.
6. Press the scroll buttons until the panel displays Housecode <A-O>.
7. Press Enter. The letter flashes.
8. Press the scroll buttons until the letter you want displays.
9. Press Enter to accept the new housecode. The panel displays Housecode
<new housecode>.
10. Press STATUS twice to exit program mode.
To program an entry-activated light:
1. Press the scroll buttons until the panel displays System programming.
2. Press Enter. The panel displays Enter code.
Simon XT Installation Manual
Description
Determines the mic gain (sensitivity) that triggers the voice-
activated switching (VOX). Room size, acoustics, and
furnishings where the panel is located will influence the setting.
Gain range is 01 (lowest) to 64 (highest).
Determines the gain range for voice-activated switching (VOX).
Range is 01 (lowest) to 64 (highest). For best results, this option
should be set equal to or greater than VOX mic gain.
This option works in conjunction with VOX mic gain. It is
important to follow the setting recommendations as described to
achieve acceptable operation.
Determines the gain level (sensitivity) during two-way audio
sessions when audio mode is set to 0 or 1 (speak). Room size,
acoustics, and furnishings when the panel is located will
influence the setting. Gain range is 01 (lowest) to 64 (highest).
51