Set Clock; Set Date - Interlogix Simon XT Installation Manual

Revision
Contrast

Set clock

If the panel loses both AC and battery power, then upon power restoral the
system time will reset to midnight and blink, indicating it has not been set
correctly. You can set the system time to display in either 12-hour or 24-hour
format.
Time of day format is HH:MMx, where:
HH = 01 to 12 (12-hour format) or 00 to 23 (24-hour format)
MM = 00 to 59
X = a or p (12-hour format) or none (24-hour format)
To reset the clock:
1. Scroll until the display shows Set Clock, and then press OK.
The display shows Enter Code.
2. Enter your code with the numeric keys, and then press OK.
The display flashes the hours.
3. Scroll to set the hours, and then press OK to accept the setting.
The display flashes the minutes.
4. Scroll to set the minutes, and then press OK to accept the setting.
The display flashes AM/PM.
5. Scroll to set the AM/PM, and then press OK to accept the setting.
The display shows the current time and stops flashing.
6. Press Status twice to exit.

Set date

If the panel loses both AC and battery power, then upon power restoral the
system date will reset.
Date format is YYYY-MM-DD, where:
YYYY = year
34
System Tests Sensor Test
Communication Test
Initiate Download Call
Simon XT Installation Manual