Central Station Reporting - Interlogix Simon XT Installation Manual

Function Default setting Required setting
Call waiting Off
Exit extension On
Swinger shutdown On (one trip)
Fire alarm verify Off
Duress/panic code Disabled
Cross zone Disabled
Table 8 below describes nonprogrammable (hard-coded) system operation, as
required to meet ANSI-SIA CP-01, and is provided only for your reference.
Table 8: Nonprogrammable (hard coded) system operation
Function
Silent exit
Remote arming exit time and progress
annunciation
Abort annunciation
Cancel report annunciation
Recent closing
Exit error
Restoration of power
Cancel alarm

Central station reporting

The panel has been tested with the following central station receivers using SIA
and Contact ID reporting formats:
Note: Before beginning installation, installers must verify compatibility with the
following central station receivers.
•
Radionics D6600 central station receiver
•
Sur-Gard central station receiver with models SG-DRL2A and SG-CPM2
•
CS5000 digital alarm communicator receiver
Simon XT Installation Manual
On if reporting to central station and customer has
call waiting service
On
On (one trip)
On
Disabled
Disabled for zones with high probability of false
alarms.
Operation
All annunciators disabled
All annunciators enabled
Enabled
Enabled
Enabled (two minute window)
Enabled
Panel resumes operation in same arming
state and disregards alarm signals from
sensors for the first 60 seconds after power
restoration
Enter code only.
19