Touchpad Options; System Options - Interlogix Simon XT Installation Manual

Touchpad options

Table 19 below describes the Touchpad Options menu.
Table 19: Touchpad Options menu
Function Default
Keyfob no delay Off
Panic alarms On
Remote TP arm Off

System options

Table 20 below describes the System Options menu.
Table 20: System Options menu
Function Default
RF jam detect Off
Demo mode Off
Simon XT Installation Manual
Description
Determines whether a key fob arms the system with no
delay (on), or not (off). When this feature is on, you must
disarm the system before entering the premises, since it is
disabling the entry delay. If the remote touchpad arming
option is on, key fobs cannot disarm the system and will
cause an alarm upon entering.
Determines whether the panel panic buttons (police,
auxiliary, and fire) activate alarms when pressed (on), or not
(off).
Determines whether key fobs and remote touchpads can
disarm the system only during exit and entry delays (on), or
arm and disarm the system anytime (off). If this option and
the key fob no delay option are on, you cannot enter and/or
disarm using remote touchpads without causing an alarm.
Description
Determines whether the panel checks for and reports RF
interference/jam to the central station (on), or not (off). If this
option is on and the panel receives a constant 319.5 MHz
signal, the panel reports the condition to the central station. If
this option is off, the panel does not detect an RF jam.
Determines whether the panel operates as a demonstration
model (on) or a standard panel (off). Turning on this feature
disables low battery supervision and allows the microphone to
remain on continuously during an AVM session. With this
option on, the panel is not testing battery supervision.
47